Universal-air-tools UT176RL Manuel d'utilisateur télécharger pdf

Manufacturer/Supplier Product Type

RPM

Cycles Per Min

Tel No

Fax No

(01494) 883300

(01494) 883237

Model No/Nos Serial No

Product Nett Weight

lbs

Recommended Use Of

Balancer Or Support

Recommended Hose Bore

Size - Minimum

Recommended Max.

Hose Length

Ins M/M Ft M

Foreseen Use of the Tool

The air engraving pen is used to write/etch on hard steel, glass, stone,

ceramic and plastic, etc. The writing/etching is achieved by a

reciprocating/vibrating sleeve item (14) and is particularly useful to

identify jigs and fixtures and to personalise tools and other equipment in

the workshop.

Do not modify or use the tool for any other purpose or for its use as an

engraving pen without first agreeing any such modification with the

manufacturer or an authorised agent.

Putting Into Service

Air Supply

Use a clean lubricated air supply that will give a measured air pressure

at the tool of 90 p.s.i./6.3 bar when the tool is running with the trigger

fully depressed. Use recommended hose size and length. It is

recommended that the tool is connected to the air supply as shown in

figure 1. Do not connect the tool to the air line system without

incorporating an easy to reach and operate air shut off valve. The air

supply should be lubricated. It is strongly recommended that an air filter,

regulator, lubricator (FRL) is used as shown in Figure 1 as this will supply

clean, lubricated air at the correct pressure to the tool. Details of such

equipment can be obtained from your supplier. If such equipment is not

used then the tool should be lubricated by shutting off the air supply to

the tool, depressurising the line by pressing the trigger on the tool.

Page No 1

Engraving Pen

UT176RL

0.48

0.22 3/8 10 30 10

Includes - Foreseen Use, Work Stations, Putting Into Service, Operating,

Dismantling, Assembly and Safety Rules

Operator Instructions Important

Read these instructions carefully before installing, operating,

servicing or repairing this tool. Keep these instructions in a safe

accessible place.

Universal Air Tool Company Limited

Unit 8

Lane End Industrial Park

High Wycombe

Bucks

HP14 3BY

Vibration Level

Test Method

Tested in accordance with ISO

standards 8662/1

Less than 2.5

Noise Level

Test Method

Tested in accordance with Pneurop

test code PN8NTC1 and ISO Standard 3744

Work Stations

The tool should only be used as a handheld, hand operated tool. It is

always recommended that the tool is used when standing on a solid

floor. It can be

used in other

positions but

before any such

use, the

operator must

be in a secure

position having

a firm grip and

footing and be

aware of a

reaction force

on the hand as

result of the tool

doing work.

N/A

13,000

Metres / Sec²

Personal Safety Equipment

Use - Safety Glasses

Yes

Use - Safety Gloves

Use - Safety Boots

Use - Breathing Masks

Use - Ear Protectors

Air Pressure

Recommended Working

6.3

bar

PSI

Recommended Minimum

n/a

bar

n/a

PSI

Maximum

7.0

bar

100

PSI

Sound Pressure Level 78.0 dB(A)

Sound Power Level 90.0 dB(A)

1 2 3 4

Résumé du contenu

Page 1 - Work Stations

Manufacturer/Supplier Product TypeRPMCycles Per MinTel NoFax No(01494) 883300(01494) 883237Model No/Nos Serial NoProduct Nett WeightlbsKgRecommended U

Page 2 - Operating

Dismantling & Assembly InstructionsDisconnect tool from air supply.Remove air hose assembly (11). Take off O-ring (15). Grip body (1) andunscrew n

Page 3 - UT176RL Engraving Pen

UT176RL Engraving PenPage No 3Sep 2005 Ver 1.0Ref No Part No Description1 RL10001V Body2 RL10003 Nose3 RL10004 Throttle Valve4 RL10005 Ring Nut5 RL100

Page 4

DistributorNotesPage No 4AccessoriesThis document may not be copied wholly or in part by anyone without the consent of the Directors of Universal Air

Commentaires sur ces manuels

Pas de commentaire

Universal-air-tools UT176RL Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Universal-air-tools UT176RL. Universal Air Tools UT176RL User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Universal-air-tools UT176RL