Universal-air-tools UT8741A Manuel d'utilisateur télécharger pdf

Manufacturer/Supplier Product Type

RPM

Cycles Per Min

el No Fax No(01494) 883300 (01494) 883237

Model No/Nos Serial No (if any)

Product Nett Weight

lbs

Recommended Use Of

Balancer Or Support

Recommended Hose Bore

Size - Minimum

Recommended Max.

Hose Length

Ins M/M Ft M

Foreseen Use Of Tool

This drill is designed for the purpose of drilling holes in all types

of materials, i.e. metals, wood, stone, plastics etc. using drilling

bits designed for this purpose. It may be used with other forms

of cutting tools, polishing devices or for sanding using coated

abrasive products. Before using any such products first check

with the manufacturer their suitability for use with this type of

drill. Do not use bonded abrasive products (i.e. grinding wheels)

or saw blades or any device which has a permitted safe working

speed less than the free speed of the drill.

Do not use this drill for any other purpose than that specified

without consulting the manufacturer or the manufacturer's

authorised supplier.

Putting Into Service

Air Supply

Use a clean lubricated air supply that will give a measured air

pressure at the tool of 90 p.s.i./6.3 bar when the tool is running

with the trigger fully depressed. Use recommended hose size

and length. It is recommended that the tool is connected to the

air supply as shown in figure 1. Do not connect the tool to the

air line system without incorporating an easy to reach and

operate air shut off valve. The air supply should be lubricated. It

is strongly recommended that an air filter, regulator, lubricator

(FRL) is used as shown in Figure 1 as this will supply clean,

lubricated air at the correct pressure to the tool. Details of such

equipment can be obtained from your supplier. If such

equipment is not used then the tool should be lubricated by

shutting off the air supply to the tool, depressurising the line by

pressing the trigger on the tool. Disconnect the air line and pour

Work Stations

The tool should only be

used as a handheld hand

operated tool. It is always

recommended that the

tool is used when

standing on the solid floor.

It can be used in other

positions but before any

such use, the operator

must be in a secure

position having a firm grip

and footing and be aware

that the drill can develop a

torque reaction see

section "Operating".

Page No 1

Straight Lever Type Drill

UT8741A

2.20

1.0 3/8 10 30 10

4,500

Includes - Foreseen Use, Work Stations, Putting Into Service,

Operating, Dismantling, Assembly and Safety Rules

Operator Instructions Important

Read these instructions carefully before installing, operating,

servicing or repairing this tool. Keep these instructions in a safe

accessible place.

Universal Air Tool Company Limited

Unit 8

Lane End Industrial Park

High Wycombe

Bucks

HP14 3BY

Noise Level Sound Pressure Level 91.9 dB(A)

est Method Tested in accordance with Pneurop

test code PN8NTC1 and ISO Standard 3744

Sound Power Level 104.5 dB(A)

ibration Level

est Method Tested in accordance with ISO

standard 8662/1

Less than 2.5

Metres / Sec²

Personal Safety Equipment

Use - Safety Glasses

Yes

Use - Safety Gloves

Use - Safety Boots

Use - Breathing Masks

Use - Ear Protectors

Air Pressure

Recommended Working

6.3

bar

PSI

Recommended Minimum

n/a

bar

n/a

PSI

Maximum

7.0

bar

10.0

PSI

1 2 3 4

Résumé du contenu

Page 1 - Work Stations

Manufacturer/Supplier Product TypeRPMCycles Per MinTel No Fax No(01494) 883300 (01494) 883237Model No/Nos Serial No (if any)Product Nett WeightlbsKgRe

Page 2 - Reassembly

OperatingSelect suitable drill bit, insert the shank into the drill chuck as far as possible and tighten chuck with key supplied making sure that the

Page 3 - Ref No Part No Description

UT8741A Straight Lever Type DrillPage No 3Ref No Part No Description1 1005726 Screen2 730120 Inlet Bushing3 729703 Retaining Ring4 729702 Deflector5 7

Page 4

DistributorNotesPage No 4Accessories10) Take care against entanglement of moving parts of the tool with clothing, ties, hair, cleaning rags, etc. This

Commentaires sur ces manuels

Pas de commentaire

Universal-air-tools UT8741A Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Universal-air-tools UT8741A. Universal Air Tools UT8741A User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Universal-air-tools UT8741A